Loading ...
Loading ...
Loading ...
135
Playback
Playback Controls
The following playback types are available using the onscreen joystick guide and any of the joysticks.
NOTES
• There is no audio during any of the playback types listed in the previous table.
• During some playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the
playback picture.
• The speed indicated on the screen is approximate.
• If the clip’s bit rate setting includes Long GOP compression, during frame advance, the time advanced
between frames is approximately 0.5 seconds.
Adjusting the Volume
You can use the speaker or connect headphones to the
×
(headphone)
terminal to listen to the audio during playback. Adjust the headphone
volume with the > [
¡
! Audio Setup] > [Speaker Volume] or
[Headphone Volume] setting. If you set an assignable button to
[Headphones +] or [Headphones –] (A 119), you can press the button to
adjust the headphone volume without using the menu.
The audio signal will also be output from the SDI terminal and HDMI OUT
terminal.
NOTES
• For details on changing the audio channel, refer to
Audio Output
(A 146).
Playback type Operation
Fast playback
During playback, push the joystick up or down.
Repeat to increase the playback speed to approximately 5x 15x 60x the normal speed.
Frame advance/reverse During playback pause, push the joystick up or down.
Return to playback mode
Press the joystick itself.
Alternatively, you can press the
Ò
button.
×
(headphone) terminal
Loading ...
Loading ...
Loading ...