User Manual - Page 77

For LINCOLN 2017 MKT.

Loading ...
Loading ...
Loading ...
To override smart unlock, lock your vehicle
after you have closed all doors by:
Using the keyless entry keypad.
Pressing the lock button on another
intelligent access key.
Touching the locking area on the front of
the door handle with another intelligent
access key in your hand.
When you open one of the front doors and
lock your vehicle using the power door lock
control, all doors will lock then unlock if:
The ignition is on.
The ignition is off and the transmission
is not in park (P).
Autolock
Autolock locks all the doors when all of the
following occur:
All doors are closed.
The ignition is on.
You shift into any gear putting your
vehicle in motion.
Your vehicle attains a speed greater than
4 mph (7 km/h).
Autounlock
Autounlock unlocks all the doors when all of
the following occur:
The ignition is on, all the doors are closed
and your vehicle has been in motion at
a speed greater than 4 mph (7 km/h).
Your vehicle comes to a stop and you
switch the ignition off or to the accessory
position.
You open the driver door within 10
minutes of switching the ignition off or to
accessory.
Note: If you electronically lock your vehicle
after you switch the ignition off with the
driver door closed, the doors will not
autounlock.
Enabling or Disabling Autolock and
Autounlock
Note: You can switch autounlock and
autolock on or off independently of each
other.
To enable or disable autolock, do the
following:
1. Switch the ignition on.
2. Press the power door unlock control
three times.
3. Switch the ignition off.
4. Press the power door unlock control
three times.
5. Switch the ignition on. The horn sounds
indicating your vehicle is in programming
mode.
6. Press the power door unlock control and
within five seconds, press the power door
lock control. The horn sounds once if
disabled or twice if enabled.
7. Switch the ignition off. The horn sounds
indicating programming is complete.
To enable or disable autounlock, do the
following:
1. Switch the ignition on.
2. Press the power door unlock control
three times.
3. Switch the ignition off.
74
MKT (TP4) , enUSA, First Printing
Doors and Locks
Loading ...
Loading ...
Loading ...