Loading ...
Loading ...
Loading ...
OPERATING ON STEEP HILLS
Operating on excessively steep hills could cause an overturn.
Never operate on hills too steep for the ATV or for your abilities.
Never operate a 1-up ATV on hills steeper than 25 degrees.
STALLING WHILE CLIMBING A HILL
Stalling, rolling backwards or improperly dismounting
while climbing a hill could cause a rollover.
Always maintain a steady speed when climbing a
hill.
Always move the 4X4 switch to ADC (if equipped)
before ascending or descending a hill.
If all forward speed is lost:
Lean forward to keep body weight uphill. A passenger should also lean uphill.
Apply the brakes.
Lock the parking brake when fully stopped.
Dismount on the uphill side of the vehicle, or on the left if the vehicle is
pointing straight uphill. Have a passenger dismount first, then the operator
may dismount.
Turn the ATV around and remount, following the procedure described in the
owner's manual.
If the ATV begins rolling downhill:
Keep operator and passenger body weight uphill.
Never apply engine power.
Never apply the rear brake while rolling backwards. Apply the hand brake
gradually.
When fully stopped, apply the rear brake as well, and then lock the parking
brake.
Dismount on the uphill side of the vehicle, or on the left if the vehicle is
pointing straight uphill. Have a passenger dismount first, then the operator
may dismount.
Turn the ATV around and remount, following the procedure described in the
owner's manual.
17
SAFETY
Loading ...
Loading ...
Loading ...