Loading ...
Loading ...
Loading ...
Frequently asked questions
26
The following faults can be corrected without contacting the Miele Service Depart-
ment.
If in doubt, please contact Miele.
Repairs should only be carried out by an authorized technician in accor-
dance with local and national safety regulations. Unauthorized repairs could
cause injury or appliance damage. Do not attempt to open the warming drawer
housing.
Problem Possible cause and solution
The drawer does not
heat up.
The plug is not properly inserted.
Insert the plug.
The circuit breaker has tripped.
Check the fuse (minimum fuse rating: see data
plate). If the drawer still will not turn on after reacti-
vating the fuse, contact a qualified electrician or
Miele Technical Service.
The food is not hot
enough.
The "Keep Warm" mode is not set.
Set the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The air vents are covered.
Make sure that air can circulate freely.
The food is too hot. The "Keep Warm" mode is not set.
Set the correct operating mode.
The temperature setting is too high.
Select a lower temperature.
The dishes are not hot
enough.
The "Warm Dishes/Plates" mode is not set.
Set the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The air vents are covered.
Make sure that air can circulate freely.
The dishes have not been warmed long enough.
The warming-up time for dishes is influenced by
various factors (see "Warming dishes").
Loading ...
Loading ...
Loading ...