Loading ...
Loading ...
Loading ...
REFRIGERATOR INSTALLATION
IMPORTANT: Before you begin, unplug the refrigerator or disconnect the power source. Remove all food and any
adjustable doors or bins from the refrigerator doors.
HOW TO REVERSE DOOR SWING (When converting from left-opening mode to right-opening mode )
(when converting from the left-opening type to right-
opening type)
1. Removing Refrigerator Door
Once the door has been removed, remove the screws (6), the stopper (7) Hinge Pin (8) located below this and remove
REFRIGERATOR DOORS: HOW TO REMOVE AND REVERSE (OPTIONAL) For Models with
T O O L S N E E D E D
Hex Socket Wrench
Phillips Screwdriver
Flat Head Screwdriver
Allen Wrench
10 mm
1/4 in
3/8 in
1/4 in
3/32 in
You may find it more convenient to have the doors converted from the left-opening type (factory installed) to the
1/4 inch socket wrench 10mm open-end wrench
Adjustable wrench Flat 2-inch putty knife
Gently pry the Top Hinge Cover with a flat head screwdriver and remove (1).
Using 10mm spcket wrench, remove the 3 bolts and lift off the Top Hinge. Set parts aside (2).
Remove the pivot (3) and the cap (4) and place them in the opposite side.
Gently lift the refrigerator door (5) a little and remove.
Install the hinge (10) on the opposite side of the door replace the screws (11), the stopper (12) and Hinge Pin (13).
Using the ¼ inch socket wrench, loosen the pin (14) and remove it.
Remove the 4 screws (15 and 16) and remove the hinge (17).
13
Pull-out Drawer
right-opening type. Directions refer to the right side as your right when facing the unit.
Other necessary tools are:
the hinge (9).
15
16
17
5
10
11
12
13
1
2
14
6
7
8
9
4
3
Loading ...
Loading ...
Loading ...