Loading ...
Loading ...
Loading ...
GENERAL INFORMATION
Wet brakes result in reduced braking
efficiency. Gently press the brake pedal a
few times when driving from a car wash or
standing water to dry the brakes.
Brake Over Accelerator
In the event the accelerator pedal
becomes stuck or entrapped, apply steady
and firm pressure to the brake pedal to
slow the vehicle and reduce engine power.
If you experience this condition, apply the
brakes and bring your vehicle to a safe
stop. Shift the transmission to park (P)
(automatic transmission) or to a low gear
(manual transmission), switch the engine
off and apply the parking brake.
Check the accelerator pedal and the area
around it for any items or debris that may
be obstructing its movement. If none are
found and the condition persists, have your
vehicle towed to the dealer for service.
Emergency Brake Assist
Emergency brake assist detects when you
brake heavily by measuring the rate at
which you press the brake pedal. It
provides maximum braking efficiency as
long as you press the pedal. Emergency
brake assist can reduce stopping distances
in critical situations.
Anti-lock Brake System
This system helps you maintain steering
control and vehicle stability during
emergency stops by keeping the brakes
from locking.
It illuminates when you switch
the ignition on. If the light does
not illuminate during start up,
remains on or flashes, the system may be
disabled. Have the system checked by an
authorized dealer. If the anti-lock brake
system is disabled, normal braking is still
effective.
If the brake warning lamp
illuminates when you release the
parking brake, have the system
checked by an authorized dealer. This lamp
also illuminates momentarily when you
switch the ignition on to confirm the lamp
is functional. If it does not illuminate when
you switch the ignition on, or begins to
flash at any time, have the system checked
by an authorized dealer.
Note: Occasional brake noise is normal. If
a metal-to-metal, continuous grinding or
continuous squeal sound is present, the
brake linings may be worn-out. If your
vehicle has continuous vibration or shudder
in the steering wheel while braking, have
your vehicle checked by an authorized
dealer.
Note: Brake dust may accumulate on the
wheels, even under normal driving
conditions. Some dust is inevitable as the
brakes wear. See Cleaning the Wheels
(page 244).
Note: Depending on applicable laws and
regulations in the country for which your
vehicle was originally built, the brake lamps
may flash during heavy braking. Following
this the hazard warning flashers may also
flash when your vehicle comes to a stop.
See Warning Lamps and
Indicators (page 89).
157
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing
Brakes
Loading ...
Loading ...
Loading ...