Please read these instructions carefully
and retain for future reference.
Carveasy
™
Electric Knife
Instruction Booklet
This book covers the use and care of the following Sunbeam Electric Knives:
EK3800 Sunbeam Carveasy
™
EK5600 Sunbeam Carveasy Pro
™
EK5600
EK3800
Important instructions – retain for
future use.
Sunbeam’s Safety Precautions 1
Features of your Sunbeam Carveasy Pro 2
Features of your Sunbeam Carveasy 3
Using your Sunbeam Carveasy Knife 4
Slicing Hints 5
Care and Cleaning 6
Contents
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:
• Readcarefullyandsavealltheinstructions
provided with an appliance.
• Alwaysturnthepoweroffatthepoweroutlet
beforeyouinsertorremoveaplug.Remove
by grasping the plug - do not pull on the cord.
• Turnthepoweroffandremovetheplug
when the appliance is not in use and
before cleaning.
• Donotuseyourappliancewithanextension
cord unless this cord has been checked
and tested by a qualified technician or
service person.
• Alwaysuseyourappliancefromapower
outletofthevoltage(A.C.only)marked
on the appliance.
• Thisapplianceisnotintendedforuseby
persons(includingchildren)withreduced
physical, sensory or mental capabilities, or
lackofexperienceandknowledge,unlessthey
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Childrenshouldbesupervisedtoensurethat
they do not play with the appliance.
• Thetemperatureofaccessiblesurfacesmaybe
high when the appliance is operating.
• Neverleaveanapplianceunattendedwhile
in use.
• Donotuseanapplianceforanypurpose
other than its intended use.
• Donotplaceanapplianceonornearahotgas
flame, electric element or on a heated oven.
• Donotplaceontopofanyotherappliance.
• Donotletthepowercordofanappliancehang
over the edge of a table or bench top or touch
any hot surface.
• Donotoperateanyelectricalappliancewith
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
SunbeamAppointedServiceCentre
forexamination,repairoradjustment.
• Foradditionalprotection,Sunbeam
recommend the use of a residual current
device(RCD)withatrippingcurrentnot
exceeding30mAintheelectricalcircuit
supplying power to your appliances.
• Donotimmersetheapplianceinwater
or any other liquid unless recommended.
•Appliancesarenotintendedtobeoperated
bymeansofanexternaltimerorseparate
remote control system.
•Thisapplianceisintendedtobeusedin
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.
Sunbeam’s Safety Precautions
SAFETYPRECAUTIONSFORYOUR
SUNBEAMELECTRICKNIFE.
• Cautionisnecessarywhenhandlingtheblades.
• Serratededgesofthebladesareverysharp.
• Donotallowchildrentoplaywithblades.
1
2
Features of your Sunbeam
Carveasy
™
Pro
Blade release button
Extra long stainless steel blades
Double movement
safety trigger
Soft touch ergonomic handle
Neon power light
Handy hang up loop
Micro serrated stainless steel blades
Serrated stainless steel blades are durable
and sharp for efficient slicing and carving.
Blade release button
Conveniently located at the top of the handle
for thumb action release of the stainless steel
blades.
Double movement safety trigger
Located under the handle for ease of
operation,theindex-fingertriggeraction,
allowing the most comfortable position for
carving. The double movement trigger system
provides added safety.
Neon power light
The neon power light indicates when the
Carveasy Pro
™
is plugged in and switched on.
Handle
Convenient and simple to operate. The
ergonomic design provides comfort, versatility
and control when carving both vertically and
horizontally.
Handy hang up loop
The handy hang-up loop enables the product
to be stored conveniently for easy access any
time.
Safety guards
Forsafefittingandremovalofblades
EK5600 Pictured
3
Features of your Sunbeam
Carveasy
™
Blade release button
Extra long stainless steel blades
Double movement
safety trigger
Soft touch ergonomic handle
Neon power light
Handy hang up loop
Micro serrated stainless steel blades
Serrated stainless steel blades are durable
and sharp for efficient slicing and carving.
Blade release button
Conveniently located at the top of the handle
for thumb action release of the stainless steel
blades.
Double movement safety trigger
Located under the handle for ease of
operation,theindex-fingertriggeraction,
allowing the most comfortable position for
carving. The double movement trigger system
provides added safety.
Neon power light
The neon power light indicates when the
Carveasy
™
is plugged in and switched on.
Handle
Convenient and simple to operate. The
ergonomic design provides comfort, versatility
and control when carving both vertically and
horizontally.
Handy hang up loop
The handy hang-up loop enables the product
to be stored conveniently for easy access any
time.
Safety guards
Forsafefittingandremovalofblades
EK3800 Pictured
4
Using your Sunbeam Knife
1. Interlock blades together before inserting
into the appliance. To assemble blades,
grasp shaft ends below the safety guards
and slip the rivet on the tip of the other
blade.SeeFigure1.Bringbladestogether
ensuring tips remain together.
Note:Alwaysusebothbladeswhenoperating
the Carveasy
™
and the Carveasy
™
Pro.
2. Hold assembled blades by the safety
guards and slide shafts gently into the
blade slot until clipped into position.
SeeFigure2.
Warning:Onlywhenbladesarefittedshould
the cord be connected to the
power outlet.
3.Inserttheplugintoa230-240volt(AC
only)poweroutletandensurethecordis
well away from the blades. Holding the
knife with one hand, slide and press the
double movement safety trigger positioned
under the handle to activate the motor.
Releasingtheswitchwillautomatically
stop the motor.
Warning:Avoidcontactwithmovingparts.
Keep hands, hair, clothing and other utensils
away from moving blades during operation to
preventpersonalinjuryand/ordamagetothe
knife.
4. When slicing is completed, turn the power
off at the power outlet and remove the
plug.SlidebacktheBladeRelease,hold
the blades by the safety guards with the
cutting edge facing downward and pull the
bladesoutoftheslots.SeeFigure3.
Warning: The blades of your Sunbeam
Carveasy
™
and Carveasy
™
Pro are sharp!
Handlewithextremecare.Werecommend
using the guard sleeve provided when
handlingtheblades.Donotfitorremove
blades whilst the knife is connected to
thepoweroutlet.Donotallowchildrento
operate the appliance.
Figure1
Figure2
Figure3
5
Alwaysplacefoodtobeslicedonawooden
orplasticcuttingboard.Donotslicefood
on china; metal or bench tops, as scratching
may occur. Guide blades through food.
Asawingactionisnotnecessary.Donot
force blades through food. To maintain the
sharpness of blades, do not cut through
bones, fruit pips or stones or any other hard
substances.
Forbestresultswhencarvingmeatand
poultry allow cooked meat to stand for 10-15
minutesbeforeslicing.thisallowsthejuices
to set and makes carving easier and neater.
Beforecarvingmeatorchicken,remove
skewers. If desired, string may be left around
the meat whilst carving. The use of a carving
fork to steady the meat assists in carving
straight,evenslices.Donotattemptto
sharpen blades.
We recommend when slicing foods like bread,
a light smear of cooking oil, margarine or
similar, on the inside of the blades will
reduce the friction.
Slicing Hints
6
Care and Cleaning
Warning: Ensure the unit is switched off
and the plug removed from the power outlet
beforeremovingthebladesand/orcleaning.
Unlockthebladesbyslidingapart.Always
hold blades by the shaft end, behind the
safety guard, when handling and cleaning.
Wash the blades in hot soapy water with a
softclothorsponge.Rinsethoroughlyand
drycompletely.Donotuseabrasivescouring
padsorpowdersonblades.Aftercleaning,
always store blades in plastic sleeves. To
clean motor housing wipe with a soft damp
cloth.
Beforestoringyourknife,alightsmearof
cooking oil or similar on the inside of the
blade is suggested.
Notes
Notes
Shouldyouexperienceanydifficultieswith
your appliance, please phone our customer
service line for advice on 1300 881 861 in
Australia,or0800786232inNewZealand.
Alternatively,youcansendawrittenclaim
to Sunbeam at the address listed below.
Onreceiptofyourclaim,Sunbeamwill
seek to resolve your difficulties or, if the
appliance is defective, advise you on how
to obtain a replacement or refund.
YourSunbeam12MonthReplacement
Guarantee naturally does not cover misuse
or negligent handling and normal wear and
tear.
Similarlyyour12MonthReplacement
Guarantee does not cover freight or any other
costs incurred in making a claim. Please
retain your receipt as proof of purchase.
The benefits given to you by this guarantee
are in addition to your other rights and
remedies under any laws which relate to the
appliance.
Ourgoodscomewithguaranteesthatcannot
beexcludedundertheAustralianConsumer
LawandundertheNewZealandConsumer
GuaranteesAct.
InAustraliayouareentitledtoa
replacementorrefundforamajorfailureand
for compensation for any other reasonably
foreseeablelossordamage.Youarealso
entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to
amajorfailure.
Should your appliance require repair or
service after the guarantee period, contact
your nearest Sunbeam service centre.
ForacompletelistofSunbeam’sauthorised
service centres visit our website or call:
Australia
www.sunbeam.com.au
1300 881 861
Units5&6,13LordStreet
BotanyNSW2019Australia
New Zealand
www.sunbeam.co.nz
0800786232
26VesteyDrive,MtWellington
Auckland,NewZealand
In the unlikely event that this appliance develops any malfunction
within 12 months of purchase (3 months commercial use) due to
faulty materials or manufacture, we will replace it for you
free of charge.
12 Month Replacement Guarantee
Need help with your appliance?
Contact our customer service team or visit
our website for information and tips on
getting the most from your appliance.
In Australia
Visit www.sunbeam.com.au
Or call 1300 881 861
In New Zealand
Visit www.sunbeam.co.nz
Or call 0800 786 232
9/12
‘Carveasy’ is a trademark of Sunbeam Corporation.
Made in China.
Due to minor changes in design or otherwise,
the product may differ from the one shown in this leaflet.
© Copyright.
Sunbeam Corporation Limited 2011.
ABN 45 000 006 771
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
Unit 3, Building D
26 Vestey Drive
Mt Wellington Auckland
New Zealand
Sunbeam Corporation is a division of GUD Holdings Ltd.
is a registered trademark.
