Loading ...
Loading ...
Loading ...
TROUBLESHOOTING & WARRANTY
SPECIFICATIONS
• Voltage: DC 24V
• Unit Dimensions (W x D x H): 8.9” x 8.9” x 12.2”
• Net Weight: Approx. 3.3 lbs
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
not work properly, contact the BLACK+DECKER customer service center or the nearest
authorized service center.
WARNING: Users must never troubleshoot internal components.
Appliance does not turn on Appliance is not plugged in
Check that the AC Power Adapter is properly
connected to the air purifier and that the
adapter is plugged into a working outlet
The fan does not work
Something is obstructing the fan.
Packing material may not have
been removed
Make sure nothing is obstructing the fan
and all material has been removed from
the unit and the filter.
The filter needs to be re
placed
Replace filter
The filter was not installed correctly
Make sure the filter was installed properly
with the plastic bag removed. After
installing the filter, press the REPLACE
FILTER indicator light for 3 seconds
There is not enough clearance
around the air purifier
Make sure nothing is obstructing the
airflow around the air purifier.
Air Purifier is set at a low speed
setting
Set at a higher speed setting
The filter needs to be replaced Replace filter
Something may be obstructing the fan
or an object may be inside the air purifier.
Remove any foreign object from the air purifier
The plastic packaging may not have
been removed from the filter.
Make sure the filter was installed on a firm
level surface with the plastic bag removed
The REPLACE FILTER
light is still illuminated after
replacing the filter
The filter was not installed correctl
y
or the filter was not reset by pressin
g
the REPLACE FILTER button
Make sure the filter was installed properly
with the plastic bag removed. After
installing the filter, press the REPLACE
FILTER indicator light for 3 seconds
There is a source of pollution near
the air purifier such as someone is
smoking.
After operating the air purifier for a
period of time, the air quality indicator
will turn blue or green when the air
quality is getting better.
The particle sensor may be clogge
d
with dust or other debris.
Wipe the particle sensor and make sure
there is no dust or debris obstructing it.
Air quality indicator is
always red (Model BAPT02 only)
The air purification is poor
The air purifier beeps
Air purifier is noisy
Troubleshoot your problem by using the chart below. If the air purifier still does
Page 12
Loading ...
Loading ...
Loading ...