Loading ...
Loading ...
Loading ...
Cleaning and maintenance
46
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time.
1. After selecting the pyrolytic cycle
duration, press the control knob. The
display shows the current time and the
symbol comes on.
2. Turn the control knob to set the time you
wish the pyrolytic cycle to finish.
3. After a few seconds, the and
symbols remain lit steadily and the
appliance waits for the set start time to
start the cleaning cycle.
4.9 Extraordinary maintenance
Replacing the internal light bulb
1. Unscrew bulb protector 1, anticlockwise.
2. Replace the bulb 2 with one of the same
type (25W). Use only oven bulbs (T
300°C).
3. Re-fit bulb protector 1.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
Live parts
Danger of electrocution
• Unplug the appliance from the power
supply.
Loading ...
Loading ...
Loading ...