Loading ...
Loading ...
Loading ...
181
uuOperating the Switches Around the Steering Wheel uAuto High-Beam
Controls
The high beams come back on once the condition that caused them to turn
off no longer exists.
If needed, you can temporarily turn the system off manually. Turn on the high
beams by pushing the lever forward until you hear a click, or flash the high beams
once by pulling the lever toward you. To turn the system back on, pull and hold the
lever towards you for a few seconds.
Disable the system when the vehicle is parked
with the power mode is in ON and the light
switch is in the AUTO position.
Disabling the system: Pull the light switch
lever towards you and hold it for at least 40
seconds. The auto high-beam indicator in the
meter will blink twice.
Re-enabling the system: Pull the light
switch lever towards you and hold it for at
least 30 seconds. The auto high-beam
indicator in the meter will blink once.
■
Disabling or Re-enabling the System
1Disabling or Re-enabling the System
The auto high-beam is in the previously selected
disabled or re-enabled setting each time you start the
engine.
19 PILOT HMA ELP-31TG76300.book 181 ページ ２０１８年６月６日 水曜日 午後６時５分
Loading ...
Loading ...
Loading ...