Loading ...
Loading ...
Loading ...
7.
CONTROLS AND
INDICATORS
12
A
E
1
7
6
5
4
3
2
8
B
D
C
A-Programme Selector -
in both directions it's possible to select the
desired drying program. To cancel the
selections or switch off the dryer rotate the
knob on OFF.
Rotating the knob
B- Display Digit - The display shows the
remaining time for drying, the postponed
time in case of delayed start selection and
other notifications setting.
C-Buttons -
1.Start/Pause Button - To start the selected
program and/or suspend it.
2. Super Easy Iron - This option allows to
reduce folds and tangles, thanks to
alternating movements of the drum during
and after drying and automatically, setting
the ironi drying level (the drying level setting
can be modified after the option selection)
The option ca be set up to five minutes after
the start of the cycle and is activated only on
automatic cycles.
3.Rapids Button - It's possible switch an
automatic program to RAPID program, up to
3 minutes after the start of the cycle. The
progressive pressure increases the time (30-
45-59 minutes).
After this selection to reset the automatic
dying functioning is necessary to switch off
the dryer In case of incompatibility, all LEDs
flash quickly for 3 times.
4.Drying Selection Button
It allows to set the desired dryness level
editable option up to 5 minutes after the
starting of the cycle:
- Ready to Iron : It leaves the garments
slightly wet to facilitate ironing.
- Dry Hanger : To get garment ready to be
hang
- Dry wardrobe : For laundry that can be
directly stored
-Extra-dry : To get completely dry
garments, ideal for full load.
This appliances is equipped with Drying
Manager Function. On automatic cycles,
each level of intermediate drying, prior to the
reaching the selected one, is indicated by
flashing the light indicator corresponding to
the degree of drying reached.
5.
6.
8.Keylock - This function allows to block
unwanted changes of the set options on the
bezel , during drying phase.
Activation/ Inactivation: Push 4 and 5 buttons
simultaneously for two seconds . The sign
"LOC" appears on the display. Unlocking the
option, on the display appears the sign "Unl",
only once. In case of opening of 'porthole' with
activated key lock, the cycle stops but the lock
is kept: to restart the cycle, you must remove
the lock and restore Start. When the dryer is
off, the option is automatically inactivated.Key
lock can be modified at any time of the cycle.
all LEDs flash
quickly for 3 times.
Delay Start Button - It allows to delay the
start of the program from 1 to 24 hours in 1-
hour intervals. The delay selected is shown
on the display.
After pressing the START button the time showed
decrease hour after hour.
Opening of the porthole with delayed start set,
after re-closing the porthole, press start again to
resume the counting.
7.Time cycle selection - It's possible transform
a cycle from automatic to programmed, up to 3
minutes after the start of the cycle.
The progressive pressure increases the time in
10-minute intervals. After this selection to reset
the automatic dying functioning is necessary to
switch off the dryer In case of incompatibility, all
LEDs flash quickly for 3 times.
Memory - This option allows you to
store the options set on a cycle.
STORAGE When the cycle is running push the
button "memory" for three seconds. The control
light "memory" flashes for three times and stores
the set options connected to the cycle selected in
the flange.
Recall: After the selection of the cycle Push the
button "memory" for recall the stored options.
(not the cycle)
Loading ...
Loading ...
Loading ...