Loading ...
Loading ...
Loading ...
English22
Operations
Operations
06 Filter Reset (3 sec)
Filter Reset
After about 6 months of using the original water lter (which typically
amounts to about 300 gallons (1136 liters) of water), the Filter
indicator blinks red to remind you that the lter needs to be replaced.
When this happens, replace the lter, and then press and hold Filter
Reset for 3 seconds. This resets the lter lifecycle detector and turns
off the Filter indicator.
NOTE
• Some areas have relatively large amounts of lime in their water.
This may reduce the lifecycle of the lter. In these areas, you will
have to replace the water lter more often than specied above.
• If water is not dispensing properly, the water lter is most likely
clogged. Even if the Filter indicator is not blinking, replace the
water lter.
07 Deodorizer Reset (3 sec)
Deodorizer
Reset
After about 18 months of using the original deodorizer lter, the Filter
indicator blinks red to remind you that the lter needs to be replaced.
If this happens, replace the lter, and press and hold Deodorizer Reset
for 3 seconds. The lter lifecycle will be reset and the Filter indicator
turns off.
08 Door Alarm / °C °F (3 sec)
Door Alarm
You can enable or disable the door alarm by pressing Door Alarm.
When Door Alarm is enabled and a door is left open for more than 2
minutes, the alarm will sound and the alarm indicator will blink. The
Door Alarm function is enabled by factory default.
°C °F
You can use the Door Alarm button to switch the temperature scale
between Celsius and Fahrenheit.
To switch the temperature scale, press and hold Door Alarm for
3 seconds.
09 Override (3 sec)
Override
The Override function activates/deactivates Smart Grid.
Press Override for 3 seconds to set/clear the Override function.
FDR_Dacor_BRF8000M_DA68-03574B-05_EN.indd 22 2020-12-11 4:45:58
Loading ...
Loading ...
Loading ...