Loading ...
Loading ...
Loading ...
7
CHECKING YOUR VENT
Your dryer must be properly installed and vented to achieve
maximum drying efciency and shorten drying times. Use the
minimum recommended installation clearances found in the
Installation Instructions. Refer to the Installation Instructions
for more information.
If the dryer is not properly installed and vented, it will not be
covered under the warranty. Proper venting of your dryer is
important for satisfactory drying results. See the Installation
Instructions for more detail.
NOTE: Service calls caused by imp
roper venting will be paid for
by the customer, whether it was a paid installation or self-
installed.
1. Do not use plastic vent or metal foil vent. Use 102 mm (4")
metal or
exible metal vent. Do not kink or crush exible metal
vent. It must be completely extended to allow adequate
exhaust air to
ow. Check vent after installation. Refer to the
Installation Instructions for proper length requirements of vent.
2. Use a 102 mm (4") exhaust hood.
3. Use the straightest path possible when rou
ting the vent.
4. Use clamps to seal all joints. Do not use duct tape, screws,
or other fastening devices that extend into the interior of the
vent to secure the vent, because they can catch lint.
5. Clean exhaust vent periodically, depending on use, but at
least every 2 years, or when installing your dryer in a new
location. When cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer for nal
product check.
DRYER USE
Starting Your Dryer
WARNING: To reduce the risk of re, electric shock, or injury to
persons, read the IMPORTAN T SAFETY INSTRUCTIONS before
operating this appliance.
This booklet covers several different models. Your dryer may not
have all of the cycles and features described.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean lint screen before each load. See “Cleaning the Lint
Screen.”
2. Load clothes loosely into the dryer and close th
e door. Do not
pack the dryer. Allow space for clothes to tumble freely.
Maximum clothing load (cotton fabrics) is 9.0 kg (19.8 lbs).
Good Better
WARNING
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or re.
102 mm
(4")
WARNING
Explosion Hazard
away from dryer.
Do not dry anything that has ever had anything
ammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion or re.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline.
Failure to follow these instructions can result in death
or re.
Keep ammable materials and vapors, such as petrol,
Loading ...
Loading ...
Loading ...