Loading ...
Loading ...
Loading ...
Taking care of your machine Taking care of your machine
Removing the battery Cleaning the post-motor lter
Cleaning the lter and separator
Emptying the dirt container
Lie the handheld on
its side on a at stable
surface. Press the
battery release button.
Press the lter cover
release buttons located
on both sides of the lter
cover and pull to remove
the lter from the machine.
Turn the handheld
over and press the dirt
container release button.
Pull the dirt container
forward and up away from
the handheld to remove.
Twist the mesh lter
anti-clockwise to
unlock, lift to remove
from the separator.
Twist the separator
anti-clockwise to
unlock, lift to remove
from the handheld.
Allow 24hrs or until fully
dry before replacing.
Pull to separate the lter from the lter cover/holder.
Tap the lter and lter cover/holder over a bin to
remove any dirt/debris. Wash the lter under running
water if required (40 degrees max).
Press the handheld
release clip. Pull to
separate the handheld
from the reach wand.
Slide the battery out from
the back of the handheld.
Ensure the battery has been removed and hold the
handheld over a bin, press the dirt release button to
allow dirt/debris to fall out.
CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance
or troubleshooting checks.
CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting
checks. For continuous best performance the lter requires cleaning at least every 3 months and should be
replaced every 12 months depending upon use. Do not use your vacuum cleaner without the lters in place.
CAUTION: Always empty the dirt container before cleaning the separator and lter and remove the battery, reach
wand/accessories from the handheld.
WARNING: Don’t over ll the dirt container to avoid blocking the air ow through the vacuum cleaner. Do not exceed
the MAX line indicated on the dust container.
24hr
Loading ...
Loading ...
Loading ...