Loading ...
Loading ...
Loading ...
8
NS-CM10SS9
www.insigniaproducts.com
5 Press and hold the AUTO/PROG button for three seconds to start the delayed
start time. The AUTO/PROG indicator lights red. After a few seconds, the
current time appears in the display.
When brewing starts, the AUTO/PROG indicator turns off and the ON/OFF
indicator lights green.
When brewing is complete, your coffee maker automatically switches to
standby mode.
Cleaning your coffee maker
Cleaning coffee maker parts
You should clean your coffee maker regularly.
1 Clean the thermal carafe, funnel, and nylon filter after each use in hot sudsy
water. You can also wash these parts in a dishwasher.
2 Wipe the exterior surface of your coffee maker with a soft, damp cloth to
remove stains.
3 To prevent water from dripping into the base of your coffee maker, wipe off
the inside of the water tank lid after each use.
4 Use a damp cloth to gently wipe the warming plate. Never use abrasive
cleaner to clean it.
5 Reassemble all parts.
Removing mineral deposits
To keep your coffee maker operating efficiently, you should periodically clean the
mineral deposits left by water. The frequency for cleaning depends on the water
quality in your area and how often you use your coffee maker.
1 Fill the tank with water and household descaler or vinegar (use a 4:1 solution)
to the maximum level indicated on the water gauge. You can also use citric
acid, with a dilution of 100 parts water to three parts citric acid.
2 Place the thermal carafe on the warming plate. Make sure that the center of
the carafe aligns with the bottom of the funnel.
Notes:
• To cancel delayed brewing, press and hold the AUTO/PROG button for a
few seconds.
• To change the delayed brewing start time, repeat steps 2 through 5.
WARNING: To avoid electric shocks or damage to your coffee maker, always
unplug the power cord before cleaning. Make sure that all parts of your coffee
maker have cooled down completely.
CAUTIONS:
• Do not immerse the power cord or your coffee maker in water or any other
liquids.
• Do not use abrasive cleaners, steel wool, or scouring pads.
• Dry all parts thoroughly after cleaning, before using, or before storing your
coffee maker.
• Make sure that all parts and surfaces are completely dry before connecting
your coffee maker to a power outlet. Wet parts can cause an electric shock.
NS-CM10SS9_18-0494_MAN_V3_EN.fm Page 8 Friday, August 24, 2018 9:03 AM
Loading ...
Loading ...
Loading ...