Loading ...
Loading ...
Loading ...
www.PyleUSA.com www.PyleUSA.com
MAINTENANCE
BRUSH CLEANING
FAILURE CHECKING
ALARMING NOTICE
DUSTBIN CLEANING
WHEELS AND SENSOR WINDOWS CLEANING
MOP CLEANING
• Please timely clean the brushes when the robot
is dirty. Please pull out the brushes for cleaning
is needed. Change the brush if it has damage
• Please timely clean the dustbin and inner lter after the robot is done cleaning.
(if you wash the lter, please dry it rst before using it again.)
• Notes:
1. Please carefully check the sucking port if clean or not after pulling out the
dustbin.
2. The lter net can be washed, please dry it rst and before using it again.
• Piease timely clean the wheels and sensor windows.
• Use the dry mopping function, when the
mop is dirty, please take off the mop and
wash in water then dry it for future use.
Remark:
Remove the mop carefully to prevent
damaging the velcro at the bottom of the
cleaner
The robot will give warning tone every 10 seconds when it comes to malfunction.
WARNING TONE FAILURE CAUSE SOLUTION
Infrared detecting
system problem
Motor problem
Power of the robot is limited
Left and right wheel problem
Other problems
Clean the wheel and ground sensor windows
Clean the inlet and outlet of motor
Please charge the robot
Please clean the wheel
Please contact service center
Notes:
• Turn off the robot rst and reopen the robot for checking if the above cases can't
help you.
• Please contact service center if the above cases and rebooting can't help you.
• Turn off the robot when you're not using it
PARAMETER
ITEM PARAMETER DOCKING STATION
Rated voltage
Rated power
Battery capacity
Working time
Specication
G.W.
Dustbin capacity
Operating temperature range
Operating humidity range
Charging time
Input rating of adaptor
Output rating of adaptor
11V
15W
2200mAh
90-120 mins
330*300*63mm(including wheel height)
2.0Kg
0.35L
32°F-113°F
S85%RH
3-4H
100-240V AC 50/60Hz
DC 19V0.94A
REMOTE CONTROL
Input voltage:
DC 19V0.94A
Output voltage:
DC 19V0.94A
Battery:
CR2032,+3.0V
0706
Loading ...