BTFP72156 User Manual

Loading ...

-10-

SELECTING THE TRIP MODE:

To ensure safety, the user must lock the trigger (as described above) before changing the trigger system.

To change the trip mode, rotate the mode switch toward the body of the tool. The mode switch will lock

automatically when the indicating arrow is pointing down to the 3 nail icon stamped into the tool frame

(Contact Trip Mode) or to a single nail icon stamped in the tool frame( Sequential Trip Mode). Unlock the

trigger to resume tool operation.

DIAL-A-DEPTH

FASTENER CONTROL ADJUSTMENT

The DIAL-A-DEPTH

Fastener control adjustment feature provides close

control of the fastener drive depth: from flush with the work surface to shallow

or deep countersink. First set the air pressure for consistent drive in the

specific work as described on page 7, then use the DIAL-A-DEPTH

fastener

control adjustment to give the desired depth of drive.

IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS

MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION

•UsetheBOSTITCHpneumatictoolonlyforthepurposeforwhichitwasdesigned.

•Neverusethistoolinamannerthatcouldcauseafastenertobedirectedtowardtheuser

or others in the work area.

•Donotusethetoolasahammer.

•Alwayscarrythetoolbythehandle.Nevercarrythetoolbytheairhose.

•Donotalterormodifythistoolfromtheoriginaldesignorfunctionwithoutapprovalfrom

BOSTITCH.

•Alwaysbeawarethatmisuseandimproperhandlingofthistoolcancauseinjuryto

yourself and others.

•Neverclamportapethetriggerorcontacttripinanactuatedposition.

•Neverleaveatoolunattendedwiththeairhoseattached.

•DonotoperatethistoolifitdoesnotcontainalegibleWARNINGLABEL.

•Donotcontinuetouseatoolthatleaksairordoesnotfunctionproperly.Notifyyournearest 

BOSTITCH representative if your tool continues to experience functional problems.

Dial-A-Depth

Fastener

Control Adjustment

Sequential Trip Mode

(trip mode selector

switch pointing up)

Contact Trip Mode

(trip mode selector switch pointing down)

Loading ...

User Manual - Page 10