Loading ...
Loading ...
Loading ...
9
21 cu.ft. Top Mount Refrigerator
www.insigniaproducts.com
Using your refrigerator
Setting the refrigerator temperature
• The first time you turn the refrigerator on, the control panel LEDs turn on
for three seconds, then displays the current setting (default = 3). Your
refrigerator runs continuously for several hours until it reaches the preset
temperature. After your refrigerator is fully cooled, you can adjust the
temperature up or down to your personal preference.
• To temporarily suspend cooling in the refrigerator and freezer, press and
hold the SET button for three seconds. The STANDBY LED turns on and
cooling is turned off. Press the SET button again to cancel standby mode
and resume cooling.
# Item Description
1 SET button
Press to change the refrigerator setting from 1 (cold) to 5 (coldest).
2 LED indicators Light to show the current refrigerator setting.
3STANDBY LED
Lights to indicate when the refrigerator is in standby mode
(refrigerator and freezer are turned off ).
Notes
• If the refrigerator is unplugged or loses power, you must
wait three to five minutes before restarting it. If you
attempt to restart before this time delay, the refrigerator
will not start.
• Large amounts of food will lower the cooling efficiency of
the refrigerator.
• If you choose to change the thermostat setting, adjust it by
one increment at a time. Allow 24 hours for the
temperature to stabilize between adjustments.
NS-RTM21SS7_16-0632_MAN_V4_ENG.fm Page 9 Wednesday, August 10, 2016 3:54 PM
Loading ...
Loading ...
Loading ...