Loading ...
Loading ...
Loading ...
WARNING! (Continued)
could result in personal injury. Only use the specific
ground point, do not use any other exposed metal
parts.
5. Start the engine in the vehicle that has the booster
battery, let the engine idle a few minutes, and then
start the engine in the vehicle with the discharged
battery.
6. Once the engine is started, remove the jumper cables
in the reverse sequence.
Disconnecting The Jumper Cables
1. Disconnect the negative (-) jumper cable from the
negative (-) battery cable terminal of the vehicle with
the discharged battery.
2. Disconnect the opposite end of the negative (-) jumper
cable from the negative (-) post of the booster battery.
3. Disconnect the positive (+) jumper cable from the
positive (+) post of the booster battery.
4. Disconnect the opposite end of the positive (+) jumper
cable from the positive (+) post of the discharged
vehicle.
NOTE: The negative (-) battery cable must be connected
to the negative (-) post of the battery.
Follow these steps to connect the negative (-) battery
cable:
1. Connect the negative (-) battery terminal to the nega-
tive (-) post of the battery.
2. Push inward on the negative (-) battery cable terminal
release lever to the closed position.
If frequent jump-starting is required to start your vehicle,
you should have the battery and charging system in-
spected at your authorized dealer.
322 WHAT TO DO IN EMERGENCIES
Loading ...
Loading ...
Loading ...