Loading ...
Loading ...
Loading ...
REFERENCE AT A GLANCECONTROLSDRIVING TIPSMOBILITY
131
> Tire change with space-saver spare tire,
page 133
MINI Mobility System with onboard tool
kit and tire change set*
Follow the instructions on using the Mobil-
ity System found on the compressor and
the sealant bottle.<
Do not remove foreign bodies which have pen-
etrated the tire if possible.
Pull the sticker for the speed restriction off and
apply it to the steering wheel.
The Mobility System with onboard tool kit and
tire change set
* is located under the floor mat in
the cargo bay.
1 Filling canister
2 Hexagon wrench
*
3 Vehicle jack*
4 Wheel stud wrench
5 Flat screwdriver/Phillips screwdriver,
towing eyelet
6 Compressor
7 Package with filling hose, valve remover,
valve insert and speed restriction label
Use of the Mobility System may be ineffec-
tive if the tire puncture measures approx.
1/8 in/4 mm or more. Contact the nearest MINI
Dealer if the tire cannot be made drivable with
the Mobility System.<
Liquid sealant
1 Filling hose
2 Filling canister
Filling
1. Shake the filling canister.
2. Screw the filling hose onto the filling
canister.
3. Unscrew the dust cap from the valve of the
defective tire.
4. Screw out the valve core with the valve
remover. The valve remover is located in a
package with the filling hose.
5. Remove the cap from the filling hose.
6. Push the filling hose onto the tire valve.
7. Hold the filling canister with the cap down
and squeeze.
8. Squeeze the entire contents of the canister
into the tire.
9. Remove the filling hose.
10. Screw the valve core into the tire valve with
the valve remover.
In the event of a lost or dirty valve core
you will find another valve core in the
package with the filling hose.
Remember that the liquid canister must be
replaced every four years if the equipment has
not been used.<
Compressor
Connector, cable and connection hose are
stored in the compressor housing.
Online Edition for Part no. 01 41 2 602 030 - © 02/09 BMW AG
Loading ...
Loading ...
Loading ...