Loading ...
Loading ...
Loading ...
3) Turn the radiatior on and set it to the heat setting
and temperature level on the thermostat as
required.
Once programmed in this way, the appliance will repeat
the pre-established program every day, if the selector is
in the position.
Timer override
If you wish to override the timer settings, push the timer
switch to position 1 (fig.9) manual (timer override). To
return to timed operation push the switch back to the
middle position (fig.9).
NOTE: if the timer switch is at the 0 position (fig.9), the
heater is off and will not operate).
TURBO HEATING
Some models are fitted with a heating fan which heats
the room more quickly.
To turn this function on, push the button into the
position.
Important: a safety device cuts in and switches off the
appliance if it overheats due to an accumulation of dust
on the air intake and output grills. To restart it, unplug
from the mains and leave the appliance to cool down.
Clean the air intake and output grills with a vacuum
cleaner, then replug into the mains and turn on again.
MODELS WITH “Tilt-switch”
Some models are fitted with a tilt-switch turns the
appliance off if it should fall over. To restart the applian-
ce, simply place it upright again.
5. MAINTENANCE
Before carrying out any operation on the radiator, unplug
from the electric mains and wait for it to cool.
The oil-filled electric radiator requires no particular main-
tenance. It is sufficient to remove the dust with a soft, dry
cloth. Never use abrasive powders or solvents. If neces-
sary remove concentrations of dirt using a vacuum clean-
er.
6. IMPORTANT
WARNING: In order to avoid overheat-
ing, never under any circumstances
cover the appliances during operation,
as this would lead to dangerous overheating.
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cutout, this appliance must not
be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly
switched on and off by the utility.
The appliance is fitted with a safety device which will
switch off it in case of accidental overheating. To reset,
contact an authorised service centre.
ATTENTION: in order to avoid any danger caused by an
accidental resetting of the safety system, this appliance
must not be powered through an external timer.
- Never use the radiator near a bath, shower, basin or
swimming pool.
- Never use the radiator to dry damp garments. Never
rest the cable on hot elements.
- Use the radiator in the vertical position only.
- If the electric cable has been damaged, it must be
replaced by the manufacturer or the technical ser-
vice centre or by a qualified person so as to avoid all
risks.
- When you start the radiator for the first time, leave
it operating at maximum power for at least two
hours. During this operation, ventilate the room well
to eliminate the “new” smell emanating from the
appliance.
- It is normal for the appliance to emit a squeaking
noise when turned on for the first time.
- The appliance is not intended for use by young chil-
dren or infirm person without supervision.
- Young children should be supervised to ensure that
they do not play with the appliance.
- The appliance must never be placed immediately
under a fixed mains socket.
- This radiator is filled with a precise quantity of oil and
repairs which require it to be opened must be carried
out exclusively by the manufacturer or an authorised
service centre. In the case of oil leaks, contact the
manufacturer or the authorised service centre.
- When scrapping the appliance, respect legislation
on the disposal of oil.
- Do not use the appliance in rooms with a base area
of less than 4 m
2
.
5708014700/11.10