Loading ...
Loading ...
Loading ...
• 12 •
5.2 Using Co ee Pods
• (Fig.9) - Use a co ee spoon to remove the lter for ground
co ee (14) from the pressurized lter holder (12).
• (Fig.10) - Insert the co ee pod adapter (15) - with the
convex part facing down - into the pressurized lter holder
(12).
• (Fig.11) - Then, insert the pod lter (16) into the pressurized
lter holder (12).
• (Fig.13) - Insert the pressurized lter holder into the brew
unit (8) from the bottom.
• (Fig.14) - Turn the lter holder from left to right until it
locks into place. Release the grip from the pressurized
lter holder. The handle is automatically slightly turned
leftwards.
This movement guarantees proper pressurized lter holder
performance.
• (Fig.16) - Preheat the pressurized lter holder by switching
the selection knob (17) to the "
" position until some
water spills out of it. This is to be done only for the rst
co ee brewing.
• (Fig.17) -When 150cc of water have owed out, set the
selection knob (17) to the "
" position to stop brewing.
• (Fig.19) - Remove the pressurized lter holder from the
machine by turning it from right to left and pour out any
water left.
• (Fig.12) - Insert the pod into the lter holder and make
sure the paper of the pod does not overhang the lter
holder.
• (Fig.13) - Insert the pressurized lter holder into the brew
unit (8) from the bottom.
• (Fig.14) - Turn the lter holder from left to right until it
locks into place.
• Take 1 preheated cup and place it under the lter holder.
Check that it is correctly placed under the co ee brewing
nozzles.
• (Fig.16) - Switch the selection knob (17) to the "
"
position.
• (Fig.17) - When the desired quantity of co ee has been
obtained, turn the selection knob (17) to the "
" position
to stop co ee brewing, and then remove the co ee cup.
• (Fig.19) - Wait a few seconds after brewing, then remove
the lter holder and dispose of the used pod.
Important Note: The lter (16) and the adapter
(15) should be kept clean to guarantee perfect
results. Clean daily after use.
6 TIPS FOR CHOOSING COFFEE
As a general rule any type of co ee available on the market can
be used. However, co ee is a natural product and its avour
changes according to its origin and blend; it is therefore a good
idea to try di erent types of co ee in order to nd the most
suited to your personal taste.
For optimal results, we recommend using espresso machine
blends. As a rule, co ee should always come out of the
pressurized lter holder, without dripping.
The co ee brewing speed can be modi ed by slightly changing
the amount of co ee in the lter and/or using a di erent co ee
grind.
Saeco recommends using ESE single-dose co ee pods for a
tasty co ee and easier cleaning and preparing.
BEFORE PERFORMING ANY OPERATIONS RELATED
TO HOT WATER/STEAM DISPENSING, MAKE SURE
THAT THE STEAM WAND (PANNARELLO) IS DIRECTED OVER
THE WATER RECOVERY TRAY.
7 HOT WATER
Danger of scalding! Dispensing may be preceded
by small jets of hot water. The wand can reach
high temperatures: Do not touch it directly with bare
hands.
• Press the ON/OFF button (11) and switch it to the "I"
position.
• Wait until the "machine ready" light (20) turns on. The
machine is now ready.
• (Fig.21) - Place a container or a tea glass under the steam
wand (Pannarello).
• (Fig.21) - Open the knob (3) by turning it counter-
clockwise.
• (Fig.22) - Set the selection knob (17) to the "
"
position.
• (Fig.23) - When the desired quantity of hot water has been
dispensed, set the selection knob (17) to the "
" position.
• (Fig.24) - Close the knob (3) by turning it clockwise.
• Remove the hot water container.
Loading ...
Loading ...
Loading ...