Loading ...
Loading ...
Loading ...
ICEMAKING
(1)
ICE TRAY SHOULD BE FILLED UP TO THE ICE CUBE SEPARATOR
If water is filled above ice cube separator, the cubes will
stick together.
(2)
AFTER ICE IS MADE, TRANSFER ICE TO ICE BOX
When ice is completely formed, transfer ice cubes
from the ice tray to the ice box.
• To remove ice cubes, simply twist tray as shown
in figure.
CAUTION: If the ice box
is wet, cubes will stick
together. Ice box should not
be used to make ice, since
the box could break.
(3)
A CONVENIENT ICEMAKER (NOT INCLUDED) CAN BE INSTALLED
(TFJ20JA, TFJ22JA & TFJ25PA MODELS)
An icemaker which can be bought separately can be installed
in this refrigerator. An icemaker makes ice automatically,
eliminating the chore of filling the ice tray and transferring
the ice cubes.
(4)
OPERATION OF ICEMAKER (AUTOMATIC ICE-MAKING APPARATUS)
(TPJ24BI MODEL ONLY)
GE Icemaker (automatic ice-making apparatus) does not
require manual water supply. Following completion of
installation of the water supply piping system, lower the arm
switch to “ON.” Ice is now automatically made and the
icemaker will automatically shut off when the bucket is filled
with set amount of ice.
Operation
Separator
Ice Tray
Water
Level
Do not touch food or metal containers in
the freezer compartment with wet hands.
CAUTION
DO NOT TOUCH
21
• You may
suffer from
frostbite
caused by the
low temperature.
Feeler Arm
Switch
ON
OFF
Loading ...
Loading ...
Loading ...