Loading ...
Loading ...
Loading ...
Safety Instructions
18
Position the projector in a horizontal position.
• Install the projector correctly. Incorrect
installation may cause troubles and acci-
dents.
• Do not tilt the projector more than 20
degrees above and below the horizontal.
• When you want to use your projector point-
ing up or down, make sure to place the projector straight up or down.
• Do not install the projector vertically.
Do Not Use in the Following Environments
• Do not place the projector on an unstable or slanted surface. The projector
may fall causing a personal injury.
• Do not place it in an oily, smoky, or damp location (e.g., near a cooking table
or a humidifier). It may cause a fire or an electric shock.
• Do not place it near an exhaust outlet of air-conditioning equipment.
• Do not install the projector in a humid or dusty location or a position where
there is a lot of oily or cigarette smoke. Optical parts such as a lens and mir-
ror may be stained, resulting in poor picture quality.
• Do not use the projector in a place subject to either very high or very low
temperatures. Doing so may cause malfunction.
• Operating temperature: +5°C to +35°C (Humidity: 85% or below)
• Storage temperature: -10°C to +60°C (Humidity: 90% or below)
Condensation
• If the projector is carried from a cold place to a warm place or the room tem-
perature is raised rapidly, condensation may form on the lens and mirror due
to the moisture in the atmosphere, resulting in a blurred picture. Wait until
condensation evaporates and normal picture is shown.
Using the Projector at 2300 Meters or More Above Sea Level
• If you use the projector at 2300 meters or more above sea level, the special
configuration is required to cool down the projector properly. Contact your
dealer.
Caution
20°
20°
Loading ...
Loading ...
Loading ...