Loading ...
Loading ...
Loading ...
13
The electrode of
the spark igniter is
behind each burner.
When one burner is
turned to “ON” to
light, all the burners
spark. Do not
attempt to disassemble or clean around
any burner while another burner is on.
An electric shock may result, which could
cause you to knock over hot cookware.
Sealed
burner
assemblies
Care and Cleaning
Gas Cooktop
General
information
Proper care and cleaning are important
so your cooktop will give you efficient and
satisfactory service. Follow these directions
carefully in caring for it.
Some cooktop models are provided
with cleaners. Follow the instructions
on the containers.
Before cleaning any part of your cooktop,
be sure all burners are off and cool.
DISCONNECT ELECTRICAL POWER TO
THE COOKTOP at the fuse box or circuit
breaker panel, or pull the cooktop power plug,
located beneath the cooktop and inside
the cabinets.
Control
knobs
The control knobs may be removed for easier
cleaning.
To remove knob, pull it straight up.
The knobs have a tactile grip surface, but no
special cleaning is required.
The knobs can be cleaned in a dishwasher or they
may also be washed with soap and water. Make sure
the insides of the knobs are dry before replacing.
Replace the knobs after cleaning.
NOTE: The knob stem is “D” shaped. Replace
the flat side of the knob onto the flat side of
the stem.
Turn all controls OFF before removing the
burner parts.
The burner grates, burner caps and burner ring
sub-assemblies can be lifted off, making them
easy to clean.
CAUTION: DO NOT OPERATE THE
BURNER WITHOUT ALL BURNER PARTS
IN PLACE.
Electrode
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction of
the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, please call our toll-free
number:
National Parts Center 1.800.626.2002
ge.com
Stainless
steel
surfaces
Loading ...
Loading ...
Loading ...