Loading ...
Loading ...
Loading ...
20
Oven Control Features
To set self clean:
1. Be sure the oven is empty. Removing oven racks is recom-
mended.
2. Press Self Clean and press for 3 hour clean time.
Press for 2 hour clean time. Release the key.
3. Self Clean will start after the oven door locks.
4. As soon as Self Clean becomes active, a motor driven lock
mechanism will begin locking the oven door automatically
and DOOR LOCKED will appear in the display. Do not
open the oven door when door DOOR LOCKED is
displayed (allow 15 seconds for the lock mechanism to lock
the oven). Once the oven door has locked, CLn will appear
in the display indicating Self Clean has started.
When Self Clean is finished:
Use caution when opening the oven door after
self cleaning. The oven may still be very hot and can cause
burns. To avoid possible burns stand to the side of the oven when
opening the oven door to allow hot air or steam to escape.
The oven bake and broil elements may appear
to have cooled after they have been turned off. The elements
may still be hot and burns may occur if these elements are
touched before they have cooled.
1. Cln message will turn off, and Hot will appear in display
window.
2. When DOOR LOCKED disappears from the display, the
oven may be opened.
3. When the oven interior has completely cooled, wipe away
any residue or powdered ash with a damp cloth or paper
towel.
Important note:
The kitchen area should be well ventilated. Use an open window,
ventilation fan or exhaust hood during the first self clean cycle
to help eliminate the normal odors associated with the 1st self
clean cycle.
When the clean time finishes the oven door will remain locked
until the oven has cooled sufficiently. In addition to the clean
time that was programmed, allow about 1 additional hour for
the oven to cool before opening the oven door. The Self Clean
function will not operate when the oven lockout is active.
Setting Delay Start Self Clean
To start a delay Self Clean with default clean time of 3 hours
and a start time of 9:00 o’clock:
1. Be sure the clock is set with the correct time of day, the oven
is empty and ALL oven racks are removed. Be sure oven
door is completely closed.
2. Press Delay Start. Press until 9:00 appears in the
display. The control will accept the delay start time with a
beep.
3. Press Self Clean and press for 3 hour clean time will
appear in the display.
4. The oven door locks and the Self Clean will begin at the
time you set.
If it becomes necessary to stop Self Clean when active:
1. Press . DOOR LOCKED will flash.
2. If Self Clean has heated the oven to a high temperature,
allow enough time for the oven to cool. When DOOR
LOCKED disappears from the display, the oven may be
opened.
3. Before restarting Self Clean, be sure to read important
notes below.
Important note:
• When Self Clean is active you may check the amount of
clean time remaining by pressing the Self Clean key once.
• The Delay Start (Start Time) for a Self Clean can only be
programmed to start up to 11 hours and 59 minutes after the
time showing in the display (be sure to set the clock to
current time before programming a delay start). If Self
Clean was active and then interrupted by a power failure or
cancelled before the oven was thoroughly cleaned, it may
be necessary to run another Self Clean cycle.
• If the oven temperature was high enough when Self Clean
was interrupted the oven control may not allow another Self
Clean cycle to be set for up to 4 hours.
Loading ...
Loading ...
Loading ...