Loading ...
Loading ...
Loading ...
6
Electrical Requirements for Brazil Only
Residence mains:
The mains wires must be of copper with
a minimum cross-section per ABNT (NBR-
5410.)
To protect this appliance and the mains
against over loading, this appliance must
be connected to a circuit that is protected
with a thermo-magnetic circuit breaker.
If the household circuit does not include
a circuit breaker, contact an electrician to
have one installed.
Electric outlet:
For your safety and to avoid damage to
your product, it is very important that your
product is earthed correctly.
Your appliance power cord features a
3-pin-shaped hexagon-shaped plug, 10A,
per ABNT (NBR 14136).
Your residence electrical installation
must have a suitable electric outlet for
this type of plug. If not, it is your
responsibility to have one installed
by a qualified electrician.
Use appropriate outlet type for your
appliance plug, as shown below:
Before operating this
appliance, make
sure the main voltage
at the installation site is
the same as indicated
on product technical
data label.
This information is also included on the
label attached to your appliance’s cord
near the plug.
IMPORTANT:
• If it is necessary to convert your 127V
appliance to 220V, use a 1.0 KVA
stabiliser.
• If it is necessary to convert your 220V
appliance to 127V, use a 1.0 KVA
stabiliser.
• Never plug your
appliance into multi-
plug adapters with
another appliance
in the same socket.
Do not use an exten-
sion cord. This type
of connection may cause electrical over-
load in the mains, and can damage the
appliance and could cause a fire. The
appliance should be plugged into its
own outlet.
• In case of oscillation in mains voltage,
install an automatic voltage stabiliser
with minimum rating of 1500 Watts
between the appliance and the socket.
• If the cord of this appliance is damaged,
it must be replaced. Contact your
nearest authorized KitchenAid Customer
Care Center.
Loading ...
Loading ...
Loading ...