Loading ...
Loading ...
Loading ...
6
Installation Instructions
2009 Electrolux Home Products, Inc. All rights reserved.
Installation Instructions
EXHAUSTING HOT AIR
1. Extend either side of the hose (Fig. 3) and screw the hose to
adaptor A (Fig. 4) .
2. Extend the other side of the hose and screw it to adaptor B (Fig. 5).
3. Slide the assembly onto unit (Fig. 6).
4. Affix the adaptor B into the window slider kit and seal. (Fig. 7&8)
In the COOLING Mode the appliance must be placed close to a window or
opening so that the warm exhaust air can be ducted outside.
First position unit on a flat floor and make sure there’s a minimum of 12"
clearance around the unit, and is within the vicinity of a single circuit outlet
power source.
The hose can be extended from its original length of 13.6
" up to 59", but it is
the best to keep the length to minimum required. Also make sure that the
hose does not have any sharp bends or sags. (Fig. 9)
Fig. 3
Extend the side of hose
Fig. 5
Fig. 7
Fig. 8
Window Slider Kit
Minimum:26.6"(67.5cm)
Maxmum:48.5"(123cm)
Vertical
window
Window Slider Kit
Minimum:26.6"(67.5cm)
Maxmum:48.5"(123cm)
Horizontal
window
Fig. 4
Fig. 9
Slide onto
Fig. 6
Loading ...
Loading ...
Loading ...