User Manual GE Monogram ZV48SSF1SS 48" Stainless Steel Professional Hood

- The hood was never electrically connected by the installer/electrician/builder. Call the electrician/installer/builder to
complete the the installation. This is not covered by warranty.
- A fuse may be blown or a circuit breaker tripped. Replace the fuse
or reset the circuit breaker.

Parts
- If a service part or accessory is no longer available, there is not a compatible part we can substitute.
- You may be able to locate the part through another source. Check for an authorized GE Appliances Parts distributor in your area who may still have the item in inventory. You may also be able to find the part by conducting an online search using the part number. Some online parts distributors or other sites that sell used or refurbished parts may still have the item in stock.
- If you are unsure which part number you need, locate the model number of your appliance and find your model on our Parts and Accessories web site. From there you will be able to access assembly diagrams that identify replacement parts from each section of the appliance. If you are unable to locate your model number or find it on our Parts and Accessories site, please Contact Us for guided assistance.
Appliances
- When an appliance is no longer manufactured, there is always a remote possibility it could still be in stock in a dealer's inventory. Since we are unable to confirm which models remain in stock at dealer sites, use our Where to Buy site for a listing of dealers near you to contact. If the model you would like is not available with any of those dealers, try expanding your search area.
- Our site provides specifications and product information on many of our appliances that are no longer manufactured. If you cannot find your model on our site, Contact Us for assistance. We can often help provide the specifications you need, or even assist you with finding a comparable model.
Publications
-Appliances that are 20+ years old may have limited literature availability (owner's manuals, installation instructions, energy guide labels, templates, and wiring diagrams). If you are unable to find literature for your model on our site, Contact Us for assistance. In some cases, we may be able to locate the materials.

In order to return damaged or unneeded parts, you need to complete the online returns process and get a Return Materials Authorization (RMA) number. Through this process, you will be given instructions on how to return the item, including the return shipping address. A RMA number is required for a return and must be visible on the return package or the return will not be processed.

The blower motor wire harness was not connected or was not connected properly by the installer/electrician/builder to its mating
connector located inside the hood on the top surface, to the left of the blower assembly.
1. Switch power off at service panel and lock the service disconnecting
means to prevent power from being switched on accidentally. When
the service disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
2. Remove the filters and locate the blower wire harness connector.
Is it plugged into its mating connector?
3. If no, plug the blower motor connector into its mating connector on
the top of the hood. Switch the power back on. Check to see
if the fan now works.
4. If no, check the circuit breaker/fuse. If it is blown/tripped, replace/
reset it. Does the blower work now? If no, call GE for service.