Loading ...
Loading ...
Loading ...
Preparation
9
Charging
The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.
Connect this unit to a computer using the
USB charging cord.
• The LED lights in red when charging is in progress.
When charging is completed, the LED will go out.
• Charging will take approximately 3.5 hours from
empty state to fully charged.
Note
• The Bluetooth
®
feature cannot be used when this unit is connected to a computer using the USB charging cord.
• Charge in a room temperature between 10 oC and 35 oC (50 oF and 95 oF). Outside of this temperature range,
charging may stop and the LED may go out.
• The power cannot be turned on while charging.
• Do not use any other USB charging cords except the supplied one.
Turning the power on/off
In the power-off state, press and hold [Í/I ( )] of this unit for
approx. 3 seconds until the LED (blue) blinks.
• A beep will sound, and the LED (blue) will blink slowly.
∫ To turn the power off
Press and hold [Í/I ( )] for approximately 3 seconds. A beep will sound
and the power will be turned off.
Note
• When the unit is not operated for approximately 5 minutes, the power will automatically turn off. (l 14, “Auto power
off”)
A
:LED
B
: USB charging cord (supplied)
• Check the direction of the terminals and plug in/out
straight holding onto the plug. (It may result in
malfunction by the deforming of the terminal if it is
plugged in obliquely or in wrong direction.)
C
: Computer
Caution: Use only the supplied USB charging cord when connecting to a computer.
A
B
C
LED
[Í/I ( )]
Loading ...
Loading ...
Loading ...