Loading ...
Loading ...
Loading ...
Treble
The display will show ⬙TREB 00⬙ to indicate that the Treble
function can be set. To increase the treble level, turn the
ROTARY knob clockwise. To decrease the treble level, turn
the ROTARY knob counterclockwise. The treble levels can
be set between -15 and 15.
Balance
The display will show the message ⬙BAL 00⬙ to indicate
that the balance function can be set. Turn the ROTARY
knob clockwise to transfer the sound to the right-hand side;
the display will show ⬙BAL R 01⬙. Turn the ROTARY knob
counterclockwise to transfer the sound to the left-hand
side; the display will show ⬙BALL01⬙. The balance levels
can be set between 0 and 15.
Fader
The display will show ⬙FAD 00⬙ to indicate that you can set
the Fader function. Turn the ROTARY knob clockwise to
transfer the sound to the front; the display will show ⬙FAD
F01⬙. Turn the ROTARY knob counterclockwise to transfer
the sound to the back; the display will show ⬙FADR01⬙.
The fader levels are set from 0 to 15.
Loudness
The display will show ⬙LOUD 00⬙ to indicate that you can
set the loudness (enhanced sound) function. Turn the
ROTARY knob clockwise to enable the loudness function at
level 1; the display will show ⬙LOUD 01⬙ and the LOUD
flag will be enabled. The radio supports three loudness
levels.
Volume
Turn the ROTARY knob clockwise to increase the volume.
Turning it counterclockwise will lower the volume. The
volume can be set between 0 and 30.
Tuner Mode (AM/FM Radio)
When you enter TUNER mode, the radio tunes to the most
recently selected station and will remain on the most
recently selected frequency band.
In this mode of operation the display will show one of the
following 5 codes:
CH (Channel)
When this is on, it indicates that the current radio station
preset is stored in memory. The code is only shown when
the tuned frequency is showing on the display.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 139
Loading ...
Loading ...
Loading ...