Crossover DLHF0817EOPL - 27 Inch Electric Dryer

User Manual - Page 14

For DLHF0817EOPL. Also, The document are for others Crossover models: DLHF0817EMI, DLHF0817E, DLHS0817EMI, DLHS0817E, DLHF0817GMI, DLHF0817G, DLHS0817GMI, DLHS0817G

PDF File Manual, 22 pages, Read Online | Download pdf file

DLHF0817EOPL photo
Loading ...
Loading ...
Loading ...
Service Mode
4:1
To activate Service Mode for machines with coin meters:
1. Remove the coin box.
2. Press and release the SERVICE MODE plunger switch at the rear of the coin vault. The screen
will display “8888.
3. Press the START button. “SE” appears in the display.
4. Use the LOW and NO HEAT buttons to navigate to the desired register.
5. Press START to access the register or activate the function.
6. Use LOW and NO HEAT to change values, as appropriate. Some registers require using the
HIGH, MEDIUM, LOW and NO HEAT buttons to edit settings.
7. Press START to save new values, as appropriate.
8. Press the SERVICE MODE switch to exit. SM exits automatically after 60 seconds of inactivity
with all service functions are off.
To activate Limited Service Mode:
1. Press and hold HIGH, NO HEAT and then START buttons for three seconds.
2. Use the program buttons to enter the PIN code (default is “1234”).
3. Press START. The display shows “10” (the rst register available in LSM)
4. Use the LOW and NO HEAT buttons to navigate to the desired register.
5. Press START to access the register or activate the function.
6. Use LOW and NO HEAT to change values, as appropriate. Some registers require using the
HIGH, MEDIUM, LOW and NO HEAT buttons to edit settings.
7. Press START to save new values, as appropriate.
8. LSM exits automatically after 60 seconds of inactivity with all service functions off.
PARAMETER MEMORY REGISTER ASSIGNMENTS
000-019 Statistics: These are non-resettable counters and log registers for tracking machine usage,
coin vault access, and error codes.
020-029 Machine test functions.
030- Editable payment, drying, and control parameters.
Notes:
1. The “>” in string following register descriptions denotes one press of the “Start” button to
advance to the next value in a sequence.
2. In the “Register Assignments” section, all temperature values are specied in °C, for simplicity.
3. Register contents value shall blink at 1Hz when displayed, even if value is read-only.
Loading ...
Loading ...
Loading ...