Loading ...
Loading ...
Loading ...
16
INSTALLATION INSTRUCTIONS
A
B
D
C
E
Quick fitting
Long tubing
PLV
Short tubing
Isolation tap
Water tap adaptor
Connecting water (Water dispensing and Automatic Ice models)
1
Ensure the refrigerator is NOT plugged into a power supply. Locate the isolation tap for
cold water connection. (Tee and tap fitting not supplied).
2
Locate the water fitting kit to complete water connection installation.
3
Uncoil tubing from the back of the refrigerator and connect the quick fitting (A).
4
Connect one end of the long tubing (3.5m) to the quick fitting, and insert the other end
to the PLV (B).
– Ensure the short arrow on the PLV is pointing away from the tap. The arrow
indicates the direction of water flow.
5
Insert the short tubing into the water tap adaptor, push tubing in at least 16mm before
reaching the stop. Pull gently on the short tubing to ensure it is locked in place (C).
– If the short tubing is already attached to the water tape adaptor skip this step.
6
Insert the other end of the short tubing firmly to the PLV (D).
7
Fasten the water tap adaptor to the isolation tap. Take care not to over-tighten the
water tap adaptor (E).
8
Pull gently on all tubing connections to ensure they are locked in place. Turn isolation
tap on and check thatall connections are dry and free of drips.
Loading ...
Loading ...
Loading ...