Loading ...
Loading ...
Loading ...
Hose Connector
Locking Collar
Uni-Coupler Hose
Faucet Connector
Drain Connection
COLD Water
Supply
Connector
Water Filter
Installation Instructions
REMOVE THE UNI-COUPLE
®
HOSE
FROM INSIDE THE WASHER BASKET
1
CONNECT TO WATER LINE
2
Use the hose connector provided with the washer for a
one-faucet connection.
TO CONNECT THE WASHER:
Attach the hose connector to the faucet adapter by
pulling down on the locking collar while lifting up on
the connector until it snaps into place. Make sure
the water filter provided is in place.
CONNECT TO VALVE INLET
3
Attach the COLD water supply connector to the
COLD water valve inlet (color BLUE). Make sure the
washer is inside the connector before tightening.
TIGHTEN CONNECTOR
4
Tighten the connector, ensuring the threads are
aligned properly for tightest fit. Inspect for kinks
or binding of the hose.
CONNECT DRAIN HOSE
5
Attach the drain hose to the rear of the washer.
Install the clamp on the drain hose and tighten to
prevent leakage of water.
17
WASHER CONNECTIONS FOR PORTABLE MODEL
:6/3³21()$8&(7&211(&7,216
Loading ...
Loading ...
Loading ...