Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
31
Affix edge protection to the
adjacent cabinet fronts.
Insert the plug connector at the back
of the refrigeration appliance (see
“Installation – Electrical connection”).
Insert the plug into the electrical
socket.
The electrical socket must not be
concealed behind the appliance and
must be easily accessible in an
emergency.
Risk of damage due to electrical
overload.
If the refrigeration appliance is
electrically overloaded, this can
cause a short circuit and thus
damage your refrigeration appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Tip: Secure the power cord to prevent it
becoming caught: tie a piece of string
to the middle of the power cord and as
the refrigeration appliance is being
pushed into the niche, pull the cord
forward underneath the appliance.
Carefully push the refrigeration
appliance into the niche.
If the refrigeration appliance cannot
be pushed into the niche (because
the floor is uneven, for example),
unscrew the rear feet slightly (see
“Installation – Aligning the
refrigeration appliance”) and slide the
refrigeration appliance into the
installation niche.
Remove the edge protection from
the adjacent cabinet fronts.
Loading ...
Loading ...
Loading ...