Loading ...
Loading ...
Loading ...
!
EN
23
When a programme is running the relevant
indicator light will remain on and the 3
“PROGRAMME STATUS” indicator lights:
WASH
RINSE
DRY
will light singularly and in sequence to
indicate the current phase.
If there is any break in the power supply
while the dishwasher is operating, a
special memory stores the selected
programme and, when the power is
restored, it continues where it left off.
A 5 second alarm will sound (if not muted) 3
times at 30 second intervals and the
programme indicator light will flash to
indicate that the washing programme has
finished. The dishwasher will automatically
switch off
.
"Express" button
This button provides an energy and time
saving of 25% on average (according to the
select cycle) reducing the wash water
temperature and the drying time during the
final rinse. This programme is recommended
for light soil washes, and for slightly wet dishes
that are not fully dry, & improved drying results.
We advise you to leave the door of the
Dishwasher half-open at the end of the
cycle, to allow for a natural circulation of air
inside the dishwasher.
This model is provided with an indicator
light on the control panel which will light up
when it is necessary to reload the salt
container. The appearance of white stains
on dishes is generally a warning sign that
the salt container needs filling.
After filling the salt container, you should
press this button for a few seconds, until the
corresponding indicator light switches off.
The dishwasher start time can be set with
this button, delaying the start by 3, 6 or 9
hours.
Proceed as follows to set a delayed start:
! Choose a programme by pressing the
"PROGRAMME SELECTION" button.
WARNING:
Before starting a new programme, you
should check that there is still detergent
in the dispenser. If necessary, top up the
dispenser.
Programme operations
Programme end
Option buttons
"NO SALT" indicator light
"RESET" button for "NO SALT"
indicator light
WARNING:
If you press the reset button without
filling the salt container, this will
interfere with the correct functioning of
the salt indicator light.
In order to guarantee the correct
functioning of the salt indicator light,
YOU MUST ALWAYS FULLY
REPLENISH THE SALT CONTAINER.
"DELAY START" button
Loading ...
Loading ...
Loading ...