Loading ...
Loading ...
Loading ...
12
TOLL FREE: 1-800-798-7398
Cleaning The Pet Hair Brush
1 Slide the locking latch (a)
forward and tilt the bottom
cover upward to remove.
2 Carefully remove any blockage
or debris and cut away any
build-up of hair or string
wrapped around the rotating
bristle brush with scissors.
3 To reassemble, insert the tabs
on the front edge of the bottom
cover into the matching holes
in the top half and tilt it back
down until it clicks into place.
Maintenance
Resetting the Motor Thermostat
Your Shark
®
Navigator™
DLX Vacuum is equipped with
a protective Motor Thermostat. If
the motor should overheat, the
thermostat shuts off the power.
To reset the Motor Thermostat:
Move the Power Button to the
“O” – Off position.
Unplug the vacuum.
Check for clogged hose or filter;
unclog hose and replace filter.
Refer to Checking for Blockages
on page 11.
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the
“I” – On position to start the
vacuum.
Note: If vacuum still does not start,
contact Customer Service at:
1-800-798-7398.
Cleaning The Motorized Floor
Brush
When your motorized floor brush
needs cleaning or locks onto an
object, it automatically shuts
down to prevent damage to your
lifetime belt. The indicator light
will illuminate red warning you
to turn off the vacuum and clear
blockage immediately. The light will
reset itself once blockage has been
cleared and power has been cycled
on/off or vacuum has been locked in
the upright position.
1 Detach the motorized floor
brush from the detachable
canister.
2 Inspect the opening underneath
and the rotating brush. If a
build-up of debris is present,
remove it. Carefully cut
anything wound around the
rotating brush with scissors.
Avoid damaging or cutting the
bristles.
Rotating
Brush
Ordering Replacement Parts
To order additional parts and
accessories, go to
www.sharkclean.com
or call 1-800-798-7398.
PART PART NO.
Super Stretch Hose 152FFJ
Dusting Brush &
Crevice Tool 1115FC
Foam & Felt Filters XFF80
Hepa Filter XHF80
Turbo brush 143FFJ
Cleaning Wand 114FFJ
a
NV70_26_IB_E_130228_1.indd 12 13-02-28 1:48 PM
Loading ...
Loading ...