Loading ...
Loading ...
Loading ...
4. Attach the Fountain Basin by twisting it on to the
threaded Post. Then attach the Pump Housing to
the Fountain Basin with the 3 supplied
Screws/Washers Note: If the screws holes do not
align, twist the pump housing until they do.
5. Now stack the other pieces over the fountain.
Start with the Pump Cover, Big Dish, Dish Cover,
Small Dish, and Finally the Top Cover by screwing
it on to the threaded Pump Housing Shaft.
6. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing. Make
sure the water completely submerges the pump
and the water runs clear during operation.
NOTE: We recommend that you use distilled water
to prevent scale build-up. The first time you operate the
pump it can take up to 5 minutes for the air to be completely
expelled and water begins to flow properly
7. Plug the pump into your local power supply. Make
sure that there is no water around the plug &
always keep the power source in a dry place.
7
6
Loading ...
Loading ...