Loading ...
Loading ...
Loading ...
Do not operate this tool for long periods of time. Vibration caused by the operating
action of this tool may cause permanent injury to fingers, hands, and arms. Use gloves to
provide extra cushion, take frequent rest periods, and limit daily time of use.
WARNING: Do not cut fiber cement siding, cement backer board or other concrete and
masonry materials.
CAUTION: To reduce the risk of eye injury while using the UV light:
Do not point UV light at bystanders.
Turn off UV light when changing blade.
Do not use UV light as a flash light.
Do not stare into UV light
Jig saw should not be used by any photo sensitive individual or any individual who has
been subjected to a photo sensitive agent. (eg. Like during eye exam)
Use extra caution when cutting concave reflective work pieces to prevent incidental UV
light reflection towards your eyes or the eyes of bystanders.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
OHDGIURPOHDGEDVHGSDLQWV
FU\VWDOOLQHVLOLFDIURPEULFNVDQGFHPHQWDQGRWKHUPDVRQU\SURGXFWVDQG
DUVHQLFDQGFKURPLXPIURPFKHPLFDOO\WUHDWHGOXPEHU
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
CAUTION: Wear appropriate hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute to hearing loss.
WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS
WEAR CERTIFIED SAFETY EQUIPMENT:
rANSI Z87.1 eye protection (CAN/CSA Z94.3)
rANSI S12.6 (S3.19) hearing protection
rNIOSH/OSHA/MSHA respiratory protection
SYMBOLS
The label on your tool may include the following symbols.
V ...........................volts A ......................... amperes
Hz ......................... hertz W ........................ watts
min ........................ minutes
.......................alternating current
...................... direct current
n
o ....................... no load speed
..........................
Class II Construction
........................ earthing terminal
.......................... safety alert symbol .../min ...............revolutions or
reciprocations per minute
4
Loading ...
Loading ...
Loading ...