Loading ...
Loading ...
Loading ...
When “---” is displayed except for the above-
mentioned cases, go to your dealer for service.
To reset the average speed:
(P.27)
#
Elapsed time [TIME]
Displays the operating time since the
selected tripmeter was reset.
The elapsed time will be calculated based on
value displayed on the tripmeter (A or B)
selected.
Also, the elapsed time for tripmeter A will be
displayed when the odometer, tripmeter A,
numerical tachometer and reserve tripmeter
are selected.
Display range: 0:00 to 99:59 (hours:minutes)
● The elapsed time return to 0:00 when the
readout exceeds 99:59.
To reset the elapsed time:
(P.27)
#
Reserve fuel consumption [RES]
Displays the fuel consumption since the 1st
(E) segment of the fuel gauge starts flashing.
When the 1st (E) segment of the fuel gauge
starts flashing, the current fuel mileage,
average fuel mileage, fuel consumption,
average speed or elapsed time switch to the
reserve fuel consumption. You should refill
the tank as soon as possible.
● Flashes from “0.0” gal or L.
u When the amount of consumed fuel is
more than 0.26 US gal (1.0 L), the “RES”
mark on the display blinks faster.
After refueling more than the reserve
amount, the display returns to normal.
20181219111032_31MKPB000_enu_BOOK
Page 27 Wednesday, December 19 2018 11:25:27 JST
Operation Guide
24
Instruments (Continued)
Loading ...
Loading ...
Loading ...