Loading ...
Loading ...
Loading ...
FORESTER (NA) A8050BE–A (ENG.)
3
Instruments and controls
3-31
– CONTINUED –
n Compass zone adjustment
HB6021AB
1. The zone setting is factory preset to Zone 8. Refer to the “Com-
pass calibration zone” map shown above or one attached to the end
of this manual to verify that the compass zone setting is correct for
your geographical location.
2. Press and hold the right button for 3 seconds then release, and the
word “ZONE” will briefly appear and then the zone number will be dis-
played.
3. Press the right hand button repeatedly to cycle the display through
all possible zone settings. Stop cycling when the correct zone setting
for your location is displayed.
4. Releasing the button for 3 seconds will exit the zone setting mode.
J Outside mirrors
WARNING
Objects look smaller in a convex mirror (passenger side) and far-
ther away than when viewed in a flat mirror. Do not use the con-
vex mirror to judge the distances of vehicles behind you when
changing lanes. Use the inside mirror (or glance backwards) to
determine the actual size and distance of objects that you view in
the convex mirror.
Loading ...
Loading ...
Loading ...