Loading ...
Loading ...
Loading ...
23
SETTING OVEN CONTROLS
Setting a Delay Start Self Clean Cycle
The Self Clean and Delay Start keys control the delayed
self-clean operation. The automatic timer will turn the oven
on and off at the time you select in advance.
To set the control for the self cleaning cycle to start at a
delayed time and shut off automatically (example: 3
hour self clean cycle to start at 4:30):
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press Self Clean. CLn and 3:00 HR will show in the
display. The control will automatically clean for a 3 hour
period. If a 2 or 4 hour clean time is desired, press Self
Clean multiple times to toggle between 2, 3, or 4 hours.
3. Press START. door Loc will appear, a beep will sound,
and the word DOOR and the lock icon will flash. The
letters CLn will remain on in the display.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked, the word DOOR and the lock
icon indicator light will quit flashing and remain on.
5. Press Delay Start. Enter the desired start time using
the number keys 4 3 0.
6. Press START. DELAY, DOOR, and the lock icons will
remain on.
7. The control will start the self-cleaning at the set start
time for the period of time previously selected. At that
time, the icon DELAY will go out; CLn and oven icon
will appear in the display.
When the self-clean cycle is completed:
1. HOT will appear in the display. The time of day, the
word DOOR, and the lock icon will remain in the display.
2. When oven cools approximately 1 HOUR, door OPn
will appear, and the word DOOR and the lock icon will
flash until the door is unlocked.
Restoring Factory Control Settings
Your appliance was built with predetermined oven control
settings (default). Over time, users may make changes to
these settings. The following options have settings that can
be modified and may have been changed since the
appliance was new:
• 12 or 24 hour display mode
• Continuous Bake or 12 Hour Energy Savings mode
• Silent or audible control
• Oven temperature display (Fahrenheit or Celsius)
• Oven temperature adjustments (offsets)
Note: If you choose to restore factory default settings, all of
the above user preferences will be restored to their original
settings (factory default).
To restore oven control to factory default settings:
1. Press and hold 7 until the acceptance tone sounds
(about 6 seconds)
2. Press START. The control is now reset to default
settings.
Do not attempt to force the door open while self clean is
active or when the motor door latch is unlocking or the
door lock indicator is flashing. Once the display is clear,
the oven door can then be opened, and the timer will
revert back to the time of day.
IMPORTANT
If Self Clean was active and then interrupted by a power
failure or cancelled before the oven was thoroughly
cleaned, it may be necessary to run another Self Clean
cycle. If the oven temperature was high enough when the
Self Clean was interrupted, the oven control may not
allow another Self Clean to be set for up to 4 hours.
NOTE
Loading ...
Loading ...
Loading ...