Loading ...
Loading ...
Loading ...
EdgeStar Dishwasher 4
Connecting the Dishwasher
Your dishwasher comes equipped with a Faucet Adapter, Quick Connect, Drain
Hose and Inlet Hose. The faucet adapter must be installed on the faucet before
you can connect the dishwasher. This adapter is included inside your
dishwasher.
The faucet adapter is compatible with faucets inclusive of either male (outside) or
female (inside) threaded faucet connections.
1. Screw the faucet adapter onto (or into) the faucet tap. Check for leaks (use
Teflon or plumbers tape to eliminate any leaks if necessary).
2. Connect the six-sided connection of the drain hose to the drain port
connection on the back of the dishwasher cabinet. To avoid damage to
threads, do not over-tighten.
3. Connect the star-shaped connection of the inlet hose to the inlet port on the
back of the dishwasher cabinet. Do not over-tighten.
4. Connect the circular connection of the drain hose onto the longer (bottom)
male connection on the quick connect.
5. Connect the circular connection of the inlet hose onto the shorter (top) male
connection on the quick connect.
6. Attach the Quick Connect assembly onto the faucet adapter, by pulling down
the outer locking collar on the Quick Connect, while pushing the quick
connect assembly upward onto the faucet adapter.
7. Release the locking collar when the quick-connect assembly snaps onto the
faucet adapter. Verify the connection is secure.
8. Slowly open the hot water line and check for any sign of water leaks at all
connections. If leaks are located, immediately close the water supply and
repair the hose connections.
Pressure Relief Valve
Faucet Adapter
Locking Collar
Quick Connect assembly
Loading ...
Loading ...
Loading ...