Loading ...
Loading ...
Loading ...
10
Defrosting
The wine refrigerator will automatically defrost under most temperature settings and ambient conditions.
However, on colder settings, some frost may build up. Additionally, under more humid ambient conditions,
more frost may build up. Keep the door closed as much as possible and avoid opening the door unnecessarily
to minimize frost build-up.
If frost is preventing the door from closing properly, you may need to power the unit off until the frost melts.
Use a soft absorbent towel to dry the unit.
Normal Sounds
Your new beverage refrigerator may make sounds that are not familiar to you. Most of the new sounds are
normal. Hard surfaces like the floor or walls can make the sounds seem louder than they actually are. The
following describes the kinds of sounds that might be new to you and what may be making them.
• Rattling noises may come from the flow of the refrigerant or the water line.
• Items stored on top of the beverage refrigerator can also make noises.
• The high efficiency compressor may make a pulsating or high-pitched sound.
• The internal fan will run frequently to create a consistent internal temperature environment.
• Water running from the evaporator to the water bin may make a splashing sound.
• As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your beverage
refrigerator.
• You may hear air being forced over the condenser by the condenser fan.
Cleaning and Maintenance
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
INTERIOR CLEANING:
1. Disconnect power to the unit.
2. Open the door and remove the contents and shelves.
3. Wait until the unit defrosts.
4. With a clean cloth, wipe down the interior of the unit.
5. Reinsert the shelves and beverages.
6. Reconnect power to the unit.
EXTERIOR CLEANING:
The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as two (2)
tablespoons of baking soda to one (1) quart of water. Do not use solvent based or abrasive cleaners. Use a
soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting. If the door
panel is stainless steel, it can discolor when exposed to chlorine gas and moisture. Clean stainless steel with
a cloth dampened with a mild detergent and warm water solution. Never use an abrasive or caustic cleaning
agent.
Warning: Never attempt to remove frost with a sharp object.
Loading ...
Loading ...
Loading ...