Loading ...
Loading ...
Loading ...
14
◎ Reversing the door swing of your appliance
The unit is delivered to you with the door opening from the left side (hinge on right
side). The door of this appliance is capable of opening from either the left or right
side. To reverse the door hinge of your cooler please follow the instructions below:
NOTE: All parts removed must be saved to allow the door hinge to be reversed.
IMPORTANT: 2 ADULTS REQUIRED
1.Pry open the on the top hinge cover of the cabinet and the cap of the door spindle
carefully.
2. Open the door and whilst unscrewing all the reaming screws have the second person
hold the door steady, unscrew the remaining screws. Once released the door will
become free, lift door off bottom door hinge pin and remove safely.
3.Repeat the proceed of removing the bottom hinge. Then replace and screw the bottom
hinge into the pre-punched hole locations on the opposite side of the cabinet.
Before replacing the door you will need to replace the handle on the opposite side of the
door before reattaching the door to the cabinet:
4.Gently prise open the 2 hole locator covers on the door frame of the unit being careful
not to scratch the frame. Peel away the door gasket gently from behind the handle,here
2 screws will become exposed, undo these screws and the handle will be released.
Repeat this procedure on the opposite side of the door to fix the handle in the new
position. Replace the 2 locating hole covers to the door where the handle was originally
fixed to. Ensure the door gasket is firmly pushed back into position.
5.Again using 2 people locate the door onto the bottom hinge pin, align the door to the
cabinet edge and fix the top hinge pin in place. Ensure the door gasket is flat to the
cabinet all around the door.
Loading ...
Loading ...
Loading ...