Loading ...
Loading ...
Loading ...
Page 6 of 11
INSTALLATION
The base of the tower fan comes in two parts, which fit around the oscillation
base. Both parts fit easily together. The back half is the one with cut-outs for
the power supply cord.
1. First attach the front half of the base, aligning the holes in base with the
screw holes in the base of the fan, and lead the power cable through the
center hole.
2. Then attach the back half of the base to the front half and secure to the
main body with the four supplied screws.
3. Thread the power supply cord through the two clips in the underside of
the base.
OPERATION
Once assembled your fan may be operated by using either the manual controls located on the top of the
fan or by your remote control.
CONTROL PANEL AND SETTINGS
1. POWER BUTTON
Used to turn the tower fan ON and OFF.
2. SPEED BUTTON
Press to cycle through the three available fan speeds. – Low Speed,
– Medium Speed, and – High Speed.
MODE /STYLE BUTTON
Press to cycle through the modes.
Standard Mode: The fan will operate normally
Breeze Mode: The fan speed will vary to imitate a natural breeze.
Sleep Mode: The lights on the unit are extinguished, and the fan speed will reduce by 1 level
every 30 minutes until on Low fan speed, and will then continue to run at that speed.
3. TIMER BUTTON
Press repeatedly to increase the running time in 30-minute intervals. The timer can be set between
30 minutes and 7.5 hours.
4. SWING BUTTON
Press to turn the Swing function on and off. When it is operational the horizontal direction of the
airflow is slowly moved from side to side.
1
2
3
4
5
Loading ...
Loading ...
Loading ...