Loading ...
Loading ...
Loading ...
4.
Adjust the drive chain. 2 P. 82
5.
Hold the adjusting bolts and tighten the
lock nuts.
u To hold the adjusting bolt, use the
5 mm Hex wrench provided in the tool
kit. 2 P. 39
Torque: 15 lbf·ft (21 N·m, 2.1 kgf·m)
6.
Tighten the rear axle nut.
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
7.
Recheck the drive chain slack and rear
axle alignment. 2 P. 81
8.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tire Puncture u Removing Wheels
Troubleshooting
104
Adjusting bolt
Lock nut
Hex wrench
Loading ...
Loading ...
Loading ...