Loading ...
Loading ...
Loading ...
Faults and what to do about them. en
45
Information on the display panel
Display Cause/Remedy
- P - and ¼ The door is unlocked. It is possible to add laundry.
- P - ■ The temperature is too high. Wait until the temperature drops.
■ The water level is too high. It is not possible to add laundry. Close the door
immediately, if necessary. Press the A button to continue the programme.
¼ flashes ■ Laundry may be caught. Open and close the door again and press the A
button.
■ If necessary, push the door closed or remove some laundry and then push it
closed again.
■ If necessary, switch the appliance off and on again; set the programme and
make your individual settings; start the programme.
r lights up ■ Turn on the tap fully,
■ Supply hose kinked/trapped,
■ The water pressure is too low. Clean the filter. ~ Page 43
E:18 ■ The drain pump is blocked. Clean the drain pump. ~ Page 42
■ The drain hose/drain pipe is blocked. Clean the drain hose at the siphon.
~ Page 43
E:23 There is water in the base trough, the appliance is leaking. Turn off the tap. Call
customer services. ~ Page 48
E The childproof lock is activated – deactivate it. ~ Page 36
Å lights up Too must foam has been detected and an additional rinse cycle has been
activated. Add less detergent to the next washing cycle with the same load.
Other displays Switch off the appliance, wait for five seconds and then switch it on again. If the
display appears again, call customer services. ~ Page 48
Loading ...
Loading ...
Loading ...