Loading ...
Loading ...
Loading ...
18
2
Chapter 2
COPY FUNCTIONS
This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure
adjustment.
NORMAL COPYING
This section explains how to make a regular copy.
If "Auditing mode" has been enabled (p.51), enter your 3-digit account number.
Copying from the document glass
1
Open the document cover/SPF/RSPF,
and place the original.
Place the original face
down on the document
glass. Align it with the
original size scale.
2
Close the document cover/SPF/RSPF.
3
Press the [ORIGINAL SIZE ENTER]
key and select the original size.
When the original size is
selected, the tray with the
same size of paper is
automatically selected.
● Make sure that the PAPER SIZE indicator lights up.
●
If the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [TRAY
SELECT] key ( ) and copy from the bypass tray.
● The bypass tray must be manually selected.
●
To copy on paper of a different size than the original,
select the paper with the [TRAY SELECT] key ( ).
4
Set the number of copies.
5
Press the [START] key ( ) to begin
copying.
The copy is delivered to
the paper output tray.
An original up to 11" x 17" can be placed on
the document glass.
Note
• The paper output tray can hold up to 250
sheets of paper.
• About one minute after copying ends, "Auto
clear timer" activates and restores the copy
settings to the initial settings. (p.12) The
setting for "Auto clear time" can be changed
in the user programs. (p.44)
• Press the [CLEAR] key ( ) to stop
copying in the middle of a run.
ORIGINAL SIZE
ENTER
GINAL
PAPER
SIZE
11
X
17
8½
X
14
8½
X
11
8½
X
11
8½
X
5½
EXTRA
START
Note
Loading ...
Loading ...
Loading ...