S O N A N C E R E T R O F I T
S P E A K E R E N C L O S U R E S
Sonance Retrofit Speaker Enclosures reduce sound transmission into rooms
that are adjacent to speakers mounted in walls or ceilings. For the enclosures
to be effective it is important that they be installed according the following
directions to ensure a tight seal with the speaker.
1. Select one set of “+” and “-“ terminals on the Retrofit Enclosure and
connect the wires to either set of “+” and “-“ terminals on the speakers.
Make sure to connect the red wire to the speaker’s “+” terminal and the
black wire to the speaker’s “-“ terminal.
2. Mark the set of terminals you selected on the outside of the Enclosure.
3.Use the provided screws to attach the Enclosure to the speaker, fitting the
groove on the edge of the Enclosure onto the rim of the speaker.
To ensure that the gasket seats properly, tighten the screws in a crisscross
and diagonal pattern. See diagram of Large Rectangle below. Apply an
equal amount of torque to each screw.
4. Connect the speaker wires from the amplifier to the set of terminals on the
Enclosure that you marked in step 2.
1
1. For our bi-wired models remove the jumpers that connect the two sets of
terminals on the speaker. Connect one set of terminal wires from the Retrofit
Enclosure to one set of the “+” and “-“ terminals on the speaker. Connect
the other set of terminal wires from the Enclosure to the remaining set of “+”
and “-“ terminals on the speaker.
2. Use the provided screws to attach the Enclosure to the speaker, fitting the
groove on the edge of the Enclosure onto the rim of the speaker.
To ensure that the gasket seats properly, tighten the screws in a crisscross
and diagonal pattern. Apply an equal amount of torque to each screw.
3. Connect both sets of speaker wires to the two sets of terminals on the
Enclosure. Make sure to check for proper polarity.
T h e i n s t a l l a t i o n i s v e r y s i m i l a r e x c e p t t h a t t h e
E n c l o s u r e w i l l a t t a c h t o t h e A S B r a c k e t i n s t e a d o f t h e
A S s p e a k e r .
Loading ...
